Adjust Fiesta Mods for DRL

The first thing to be done is to remove the headlight, this is done by unscrewing two screws at the top and botton of the headlight. Also there is a plastic clip that needs to be popped out before you can remove the headlight. once removed, give it a good tug and a wiggle and it should come out relatively easy. Once the headlights out, you can start to stick down your DRL's. They come with double sided sticky tape which works very well aslong as you have a clean surface. Now for the wiring, we connected mine upto the sidelights which is very simple and they come on when you unlock your car. the buy Fiesta gold picture below shows the sidelight connectors.

Once you have confirmed they your DRL's work then simply trace the wiring from the plug down and connect them. we used Halfords cable lock connectors, meaning we didn't have to chop any wires and reconnect them. Once conplete it should look something like this or better hopefully. Also you can note selotape is not reccommened to wrap these up you should use electricians tape.